|
To broadcast its programs, a television station requires operators to operate equipment, a transmitter or radio antenna, which is often located at the highest point available in the transmission area, such as on a summit, the top of a high skyscraper, or on a tall radio tower. To get a signal from the master control room to the transmitter, a studio/transmitter link (STL) is used. The link can be either by radio or T1/E1. A transmitter/studio link (TSL) may also send telemetry back to the station, but this may be embedded in subcarriers of the main broadcast. Stations which retransmit or simulcast another may simply pick-up that station over-the-air, or via STL or satellite. The license usually specifies which other station it is allowed to carry. VHF stations often have very tall antennas due to their long wavelength, but require much less effective radiated power (ERP), and therefore use much less transmitter power output, also saving on the electricity bill and emergency backup generators. In North America, full-power stations on band I (channels 2 to 6) are generally limited to 100 kW analog video (VSB) and 10 kW analog audio (FM), or 45 kW digital (8VSB) ERP. Stations on band III (channels 7 to 13) can go up by 5dB to 316 kW video, 31.6 kW audio, or 160 kW digital. Low-VHF stations are often subject to long-distance reception just as with FM. There are no stations on Channel 1. UHF, by comparison, has a much shorter wavelength, and thus requires a shorter antenna, but also higher power. North American stations can go up to 5000 kW ERP for video and 500 kW audio, or 1000 kW digital. Low channels travel further than high ones at the same power, but UHF does not suffer from as much electromagnetic interference and background "noise" as VHF, making it much more
Posts
No comments:
Post a Comment